EOTech XPS2-0, Transverse Red Dot Sight, 65 MOA Circle with 1 MOA Dot Reticle

This Eotech Transverse XPS2-0 is delivered with the battery installed. It is ready to be dropped onto your favorite firearm, turned on, and sighted in. The mount will fit onto any 1" Weaver or Picatinny (MIL-STD-1913) rail. I can vouch for it fitting the Weaver rail as my SLP Mark 1 shotgun uses one. The XPS2-0 locks up tight on the rail with no hint of possible movement. Compared to a recently purchased low end scope mount, the difference is night and day. Included in the case is a spare tether for the battery cap along with a hex wrench for the rail mounting screw. If you prefer, you can also use the supplied thumbscrew in lieu of the hex screw. The owner's manual is quite complete and covers most anything one might think of. At just 8.8 ounces, the sight is fairly lightweight but yet extremely rugged. Before my purchase, I spent some on-line time reading comments and reviews regarding the EOTech line-up. Guns falling onto their HWS wasn't that uncommon but yet no one reported any issues.

XPS2-0 Eotech Transverse Red Dot Sight Features:

• Single transverse 123 battery to reduce sight length
• Shortened base only requires at most 2 3/4 of rail space compared to the 4" N battery sights
• Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap. Better sealing is achieved
• Battery compartment is now separated from the base to allow it to hover over delta ring of rife
• Average battery life at brightness level 12 is roughly 500-600 hours, tripling the battery life of the N sights
• 0- 65MOA ring with 1 MOA aiming dot., 1- Single 1MOA aiming dot, 2- 65MOA ring with (2) 1 MOA aiming dots

XPS2-0 Eotech Transverse Red Dot Sight Specifications:

Model: XPS2-0
Power Source: (1) 123 lithium battery
Battery Life: Approx. 600 hours
Reticle: 1 MOA Dot
Length/Width/Height: 3.75"x2.4"x2.4"95.25x60.96x60.96mm)
Weight: 8.0 oz (227 g)
Waterproof: submersible to 33 ft depth
Mount: 1"Weaver or (mIl-stD- 1913) rail